ProductsHome > Products > CNC WIRE CUT EDM MACHINE
Audemars Piguet Replica Watches
| Model | DK7780H |
| Table size(mm) | 1000*1350 |
| X,Y axis travel(mm) | 800*1000 |
| Max.cut thickness(mm) | 380 |
| U,V axis travel(mm) | Normal:24×24 ；Large taper:D-60×60 E-130×130
T-240×240 |
| Wire diameter range(mm) | Molydbenum wire： φ0.10～0.22 |
| Wire feed rate(m/sec) | 12,9,7,5,2 |
| Taper angle()/Workpiece thickness | Max.multi-cut :±1.50/50mm； |
| Process accuracy(mm)(Vertical) | Multi-cut: 10×10×30 Squire≤0.006 ; One-cut≤0.012
Octagon≤0.009 Strightness ≤0.006/50mm |
| Process roughness(Ra.um) | Multi-cut:Ra≤1.2 (Micro-pulsepower Ra≤0.8)
One-cut: Ra≤2.5 |
| Motoir drve system(axis) | Stepping motor or AC servo motor*(Option) |
| Screws & Guides(X,Y) | Precision ball screw/Linear motion guides |
| Wire tension | manual adjust |
| Dielectric conlant Reservoir capacity | Complex or water-dissovle special coolant/65L |
| Power supply | AC3 φ -380v/2.5kva |
| Max.table carry(kg) | 1200 |
| Net wt.of machine Body(kg) | 3200 |
| Outside dimension of machine | 2380×2600×2100 |
